Published at Thursday, May 04th, 2017 - 10:38:11 AM. Drawer. By shelby.
1U Rack LCD Drawer: Demanded in Industrial and Military Applications In order to overcome the space limitations in server rooms as well as provide additional solutions for server racks, the 1U Rack LCD drawer was developed.Used in a wide variety of Server room applications, these devices are 1U or 2U drawers with integrated LCD monitors, keyboards, and mice. Other options include a combination of keyboard, mouse and monitor with a KVM switch integrated into the drawer. These devices are available in various models including, USB KVM drawers, PS2 KVM drawers, Dual Slide KVM drawers, DVI KVM drawers, composite KVM drawers, Short Depth KVM drawers and KVM drawers with Cat5 and IP switches. While the USB and PS2 drawers differ in the type of servers they support, some models are available as a combo drawer and support both USB and PS2 with the use of a special cable. The Dual Slide drawer has a unique design that gives it two separate sliding components; one housing the keyboard and mouse portion and the other housing the LCD. A short depth Rackmount LCD keyboard drawer,as the name suggests, is useful for applications where rack depth is shallow. The DVI and the Composite drawers differ in the type of connection to the server. While the former work with DVI-D cards, the latter are associated with composite video. The category with an integrated Cat5 KVM Switch is an ideal solution for networks of various sizes that have many servers located away from the KVM user and server rack where the drawer is mounted. An IP KVM switch is a keyboard, monitor and mouse built into a sliding rack mount drawer with an integrated 8, 16 or 32 Port IP KVM switch and gives users the ability to connect to servers through a web browser. The 1U Rackmount Draweris equipped with features such as flip-up design, adjustable brackets, built in LCD OSD to provide effective assistance for network administrators to control single or multiple PCs and can be fitted with screens ranging from 17" to 20 ". They are a rugged unit with heavy industrial design features. Certified by CE, FCC, TAA and RoHS, this hardware device is available with 12V, 24V, and 48V DC power options for specific industrial and military applications.
Fix Your Broken Kitchen Drawer - The Real Story My first project of my Fix-It-Up series is to fix the drawers in my kitchen. One runner had completely disappeared with no one admitting the deed, and the other rails were not staying in their tracks. This caused us over the months to push, pull and tug until one whole drawer front tore loose from the drawer itself. My hubby fixed that problem but the root of the problem remained-drawers that wouldnt slide. I purposefully picked a rather easy project for my first in the series for two reasons: one, to attempt to succeed in my first project (the vanity of it all), and two, because I had just finished putting away all my Christmas stuff the week before and I was tired! My trip to Home Depot for a replacement drawer runner was successful only because of a very helpful gentleman who couldnt help overhearing me and Geri talking to a nice, although clueless, Home Depot employee. This kindly bystander just happened to be a cabinet builder, lucky for us, and filled our heads with all kinds of advice and tips about drawer problems. Ill share those with you as we go. Here are the steps I took with explanations so you can master this task yourself. * First things first; empty the drawers. Heres a picture of my totally disorganized mess. One drawer with Tupperware and such, the other with small kitchen appliances and tools. * Take your good drawer: Or an example of what you need to the hardware store with you. This is invaluable. Dont fool yourself thinking youll be able to pick out what you need from the overwhelming mass of merchandise. Believe me, it will all look the same after you get there. * Clean the area first: After you pull out the drawers, clean the empty cabinet of old dust and filth. It will make working on your project easier. * Mount the hardware to the cabinet: This was pretty easy by following the directions that came with the railings and also following the example of the intact drawer. * Drill pilot holes: Its always better to drill small pilot holes before sinking your screw, especially into particle board. Particle board will split and crumble (it happened with this project to me even with a pilot hole. Nothing that a bit of wood glue couldnt fix.) * Adjust the back bracket: The brackets that attach to the back of the cabinet were intact, but over the years had moved so that the drawer fell out of the rail when you pushed it in. Each back bracket has two holes for screws, one that slides and one that anchors the bracket. - Unscrew and remove the anchor screw but leave the screw in the slide; loosen slightly. - Slide both brackets as far towards the middle of the cabinet as possible. In other words, all the way to one end of the slide. - Carefully put the drawer back in its railings, and slowly push the drawer all the way in. - Remove drawer. - Now the back railings are exactly where they need to be to hold the drawer since the drawer itself moved the back brackets to the exact location. Tighten the slider screw, and add a screw in the anchor slot after drilling a pilot hole. Most of the time, the back brackets are parallel to eachother. * Fix any problems with the drawer: My drawer (and this was the good one!) was beginning to separate (see photo). The bottom of my drawer was only held together with little staples, so I added some wood glue and hammered the staples back in place. I totally bent one staple trying to hammer it in, so I replaced it with a screw with a pilot hole drilled first. * Clean the drawers and surrounding woodwork: Heres your chance for a thorough cleaning. I like mild soap and water, followed by Liquid Gold. * Replace the shelf liner: Mine was faded, dirty and torn...it should be, it was 15 years old! But being the pack rat that I am, I still had the original roll with plenty left to replace it. Ahhh, fresh and new. * Organize: I proudly rid myself of at least 25-50% of the stuff. The rest, I placed neatly into storage containers and bins. While youre at it, tidy up the other drawers too. * Admire your work: Its OK to be proud of yourself.
Any content, trademark’s, or other material that might be found on the TheIqCollective.com website that is not TheIqCollective.com’s property remains the copyright of its respective owner/s. In no way does TheIqCollective.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.